from QSC

Live Case Study Discussion: Overcoming UC & AV Challenges with Ecosystems

Hear how WellSky®, a leading healthcare software solutions provider, used Q-SYS and Zoom in a massive UC & AV deployment.

Thursday, May 7 at 9:00am PT / 5:00pm GMT +1h / 6:00pm CET +1h

Q-SYS Reflect Enterprise Manager Walkthrough
In these challenging times, the ability to monitor and manage your AV investments remotely is more important than ever! Join this walkthrough and receive a free extended trial until January 31, 2021!
Tuesday, May 5 (for APAC) at 9:00am HKT / 10:00am JTS / 11:00am AEDT
Wednesday, May 6 (for APAC) at 9:00am HKT / 10:00am JTS / 11:00am AEDT

Q-SYS Architect Training
Designed for AV consultants and pre-sales engineers, this crash course empowers you to specify a system built on the Q-SYS Ecosystem. No programming or commissioning knowledge required.
Tuesday, May 5 at 2:00am PT / 10:00am GMT +1h / 11:00am CET +1h
Tuesday, May 12 at 6:00am PT / 2:00pm GMT +1h / 3:00pm CET +1h

Intro to MP-M Series Mixers and MP Install App
Our Business Music specialist will show you how to configure a typical business music application with MP-M Series Mixers and MP Install application.
Tuesday, May 5 at 10:00am PT / 12:00pm CDMX (presented in Spanish)
Thursday, May 7 (for APAC) at 9:00am HKT / 10:00am JTS / 11:00am AEDT

Intermediate UCI Design
Bring your UCIs to the next level with Q-SYS Control logic! Use control logic to get the most out of layers for a main navigation, automate control page changes across multiple devices, and much more.
Wednesday, May 6 at 9:00am PT / 5:00pm GMT +1h / 6:00pm CET +1h

Advanced Lua Scripting with Q-SYS
Designed for Q SYS programmers to learn tips for creating useful components via Lua scripting and go deeper into Lua fundamentals. Please note this training is not an introduction to Lua scripting.
Wednesday, May 6 at 2:00am PT / 10:00am GMT +1h / 11:00am GMT +1h
Wednesday, May 13 (for APAC) at 9:00am HKT / 10:00am JTS / 11:00am AEDT
Thursday, May 14 at 2:00am PT / 10:00am GMT +1h / 11:00am GMT +1h

Intro to Q-SYS Logic
Thinking about getting into control? Start here! We’ll walk you through simple control logic blocks in Q SYS with practical examples for third-party device control.
Thursday, May 7 (for APAC) at 11:00am HKT / 12:00pm JTS / 1:00pm AEDT

AV Networking Tips for Q-SYS
Get to know the basics of networking with QSC. We’ll demonstrate how to setup Q-SYS on a standard network and provide the fundamentals of switch configuration.
Tuesday, May 5 (for APAC) at 11:00am HKT / 12:00pm JTS / 1:00pm AEDT
Thursday, May 7 at 10:00am PT / 12:00pm CDMX (presented in Spanish)
Tuesday, May 12 at 2:00am PT / 10:00am GMT +1h / 11:00am GMT +1h

Best Practices in Acoustic Echo Cancellation
Learn the do’s and don’ts of applying AEC for meeting rooms. We’ll discuss a proper signal chain to get the best results from your AEC and EQ blocks in Q-SYS, and more.
Tuesday, May 12 at 10:00am PT / 12:00pm CDMX (presented in Spanish)
Tuesday, May 12 (for APAC) at 9:00am HKT / 10:00am JTS / 11:00am AEDT

Zoom Rooms Controller with Q-SYS
Use simple pieces of JSON scripting, along with the Q SYS Control engine, use the Zoom Room actions to trigger Q SYS functionalities and even room configuration snapshots within your Q SYS system.
Thursday, May 14 (for APAC) at 11:00am HKT / 12:00pm JTS / 1:00pm AEDT

Register here